View Single Post
Old 08-19-2014, 12:56 AM   #10
mharvey73
Member
 
Join Date: Nov 2013
Location: tn
Posts: 49
iTrader: (0)
Default

There are a lump of new parts on this car as well.

Starter
Belts both main drive and a/c
extra gasket kits from a head and block kit
hood prop cylinders
hazard switch
spark plugs
the correct (brand new) coils for a coil on plug swap and the correct harness
new radiator top cover with the plastic clips that hold the radiator in at the top
new lower valance covers
new lower radiator support clips (plastic that break easily)
new PCV valve
used but good fuel rail with injectors,
new crank position sensor ( 600 ohm)
new cam position sensor
new cabin filters with mystery plastic piece


Both window motors work
the interior is gutted at this time so it is easier to get parts
right side mirror works, left side is busted sort of
still have the cd changer and amplifier
has the silver 5 spoke rims with un-worn but really crappy tires on them (walmart Nikkens?)
the valve cover gaskets were used, but can be shipped with the valve cover intact
the oil filter housing has been re-done including the bush O-rings and fresh filter.

all glass is intact and in good shape, including the hinged 1/4 glass
the leather seating is dirty, but in workable condition
interior plastics are 50/50
dashboard is in good condition
headliner is in good condition
Exterior body panels are 50/50

This engine makes good dry compression ( within spec) on all cyinders but cylinder 2 which is 5 pounds off from the rest. Wet compression it is the same across the board and is actually above spec by a little. Car has 191,000 miles on it.
All four rotors and brake calipers look good.

Just let me know particulars of what you want and I will do my best to get back with you.

Last edited by mharvey73; 08-19-2014 at 10:24 AM.
mharvey73 is offline   Reply With Quote