Quote:
Originally Posted by ALPINEMTECH98 Sprockets are at TDC too right? Tell me what yall think i'm doing wrong for getting ZERO compressions...thanks Attachment 15135 |
No in the picture they are not correct. The sprocket arrow needs to point up but at the angle of the head. The sprocket arrow should be aligned with the cam rear locking squares so you are a few teeth off on the sprocket on both cams. Also your exhaust sprocket should have the bolts around the middle of the sprocket adjustment.
Another issue I think is the intake cam timing wheel is not installed correctly, it looks like the metal tang for aligning that wheel trigger is not in it's hole.
Another issue will be posted in a few concerning the cam lobe picture