View Single Post
Old 11-06-2017, 01:03 AM   #12
Actuator
Junior Member
 
Join Date: Aug 2017
Location: Hernando MS
Posts: 1
iTrader: (0)
Default

Do you have a good ground between the engine and frame? Use a volt/ohm meter and check the resistance between the engine and the negative terminal ground the on the battery. If have high resistance the engine will not turn over. Another thing you could do is to just hook-up a single jumper cable somewhere ( a good place to hook it up is to the aluminum motor mount which is bolted to the engine) to the engine and the other end of the cable to the negative battery terminal cable. this will give you a good ground for testing.
Actuator is offline   Reply With Quote