 Brake upgrade master cylinder question
Hello all,
New here and to Ti's but been around BMW's for a while. I have recently purchased a S52/ZF swapped Ti. It is a 95 and still has the stock non vented brakes front and rear. I have driven it about 500 miles and would say that for everyday driving the brakes are OK, but when being pushed on the mountain roads, they fade quickly. So, I have some left over parts from some e36 M3 builds (Bilstien struts, spindles, lca's, brakes). So, the front is taken care of with that. My thought on the rear was to go with E46 328I calipers, z4 disc, with the use of an SRS adapter that should allow me to retain stock e-brake (or at least use an e brake). My question is really about the master cylinder, I am assuming that the stock one will not work (properly) so would it be best to use one from an e36 M3 or ??? Any input especially if you have this brake set up as to what works would be appreciated. Thanks in advance. Gerry |