Quote:
Originally Posted by Murt  All the years I have gone to NASA MID ATLANTIC, I have never seen a TI either. Kinda of why I am building one.
Thank you link. Rear cage tie in and raising rear subframe was what I was looking for. |
Never touched the subframe on mine beyond urethane mounts. I never saw one in Florida and combo events with Southeast. I ran mine in tte with the stock motor.
My roll bar has two pads welded into the shock tower mount. With a bar going between those two pads. The bars coming down from the roll bar hoop meet that cross bar at the very outermost edge where they coul still 360 weld it, and then there are two very short bars coming straight down to the frame rail. Not sure it is the best design, or the safest, but the rear end was definitely stiff.