View Single Post
Old 10-24-2017, 11:03 AM   #2
Bills86e
Senior Member
 
Join Date: Apr 2009
Location: TampaBay, Florida
Posts: 104
iTrader: (0)
Default

start removing at air box, remove/inspect and clean, thru throttle body, then remove plenum and change out the pcv-ccv. use new gasket and vacuumn hoses. only use mass air flow cleaner when you do the maf sensor, and carb cleaner is ok for the AFN - IAC -tps. Replace the air filter too. Cleanliness is King. After you've put her all back together, Enjoy your run like new Toy! I Love taking things apart! use tooth brush & Q-tips Watch some DIY 's on utube. Bills86e
Bills86e is offline   Reply With Quote