Thanks Mallard. I've looked at the OEM wiring diagrams until my eyes bleed, and can't find anywhere on there where it says which sensor is which. There are 2 different numbers for those sensors, but they are different than the part numbers.
The front sensor is blue, hard to reach one is black. Seems like I might have them swapped around. Tomorrow morning I'll be installing the front knock sensor, and I'll have to pull the upper plenum to get to the wiring for that. I'll swap them around and see what happens.
Stupid fan still runs full blast all times. I've looked at the wiring going to it, seems fine. Turns off only by pulling the high speed relay (and key off too). The high speed relay and low speed relay are connected....so pulling the high one won't let the low one come on if I'm looking at the diagrams correctly. |