[minimike]

Taking a long time to get the bay painted due to not being able to spend much time at the lockup however managed to get a coat of paint on it over the weekend




Still needs another coat and lacquer but will hopefully look better than the silver anyway

Also decided against the standard rad and brought a direnza alloy rad




Previous to the paint I also had to cut out my arb mount and drill out a snapped stud, I cut a little rectangle in the side to get access and cleared the packed mud out! Then cleaned it up put a bolt through from the inside and welded it in place then welded the little panel back up and ground it flat




Also is it wrong i'm really enjoying driving my girlfriends mx5 at the moment !? Haha