Thread: Misc parts Lightweight Flywheel and Clutch
View Single Post
Old 01-15-2020, 06:30 AM   #1
gkatzens
Junior Member
 
Join Date: Jan 2020
Location: Long Beach, CA
Posts: 2
iTrader: (0)
Default Lightweight Flywheel and Clutch

Hello All,
I have a used AASCO Motorsports Aluminum flywheel part number 100807-11 that fits M42 and M44 engines. It is in great working order. Also included are the crankshaft bolts and a clutch. The pressure plate is an used Sachs plate and the disk is a solid un-sprung six puck with the metal matrix pads. We ran it in our retired ChumpCar and it literally never seemed to wear at all. But, I did notice a small bit of the clutch material has fractured and come off in one place. It was working great when removed. This is a cheap way to ditch your dual mass flywheel.

$325 plus shipping for all of it.

https://drive.google.com/file/d/16ZV...ew?usp=sharing

https://drive.google.com/open?id=1-6...eacwxckZvPaVto

https://drive.google.com/open?id=1uk...KjX1NNxSU131N1

Thanks!
Garrett
gkatzens@gmail.com
gkatzens is offline   Reply With Quote