Quote:
Originally Posted by PeterJ  If you had the #3 bushings replaced, then it would not be the bushings. In my previous post I was refering to the #3 bushings. The wear mark on the spring indicates the the 2 top coils are hitting each other. I would have the parts supplier check with H&R. |
Yes also #3 bushings was replaced. I have contacted my parts supplier and they have contacted H&R about this problem. There is info about that in first post.
Today I received this silicon tube which I mentioned earlier. It is 3meters long, outside diameter is about 18mm and wall thickness is 1mm. It will probably help to the noise. We'll see how it helps after I install this tube and how long it will last..