Quote:
| Originally Posted by CirussRS22 Dredder, for the front brake pads sensor did you use a 318ti one? Or did you have to use a 330i sensor? I assume a 318ti one so the electrical plug is correct. |
The sensors were from the 318ti.
My prior setup was with E36 32X front slotted rotors and pads. The difference is like night and day. The rotors were painted with 1500 degrees ceramic paint. After hours of driving and braking the only part hot to touch is my rotors. I can hold my hands over the caliper without getting burned.
Quote:
| Originally Posted by marcus2116 will 16s fit |
Requires you have 17"
Quote:
| Originally Posted by L84THSKY The most I wanna do is add stainless steel lines and better brake fluid. |
Most likely when I replace my stock flywheel clutch to Light flywheel and clutch combo, I will replace the clutch line and brake line to stainless steel. I saw I few places that sells them or I can just have them fabricated for probably around $100 for the entire setup, brakes and clutch line.