Quote:
Originally Posted by xxxJohnBoyxxx On my car 1997 manual shift the reverse switch is on the transmission and controls the rear reverse lights. I'm not sure if a wire enters the cabin unless you are automatic. A bentley will tell which wire goes where. What do you need the reverse light wiring location for? Just interested, could be a simple rev camera or smoke screen even oil slick to evade chase |
Hi John! to automate the tire spikes and chaff in a quick run away.
Nah, just the trigger for the auto dimming mirror. I also have a 97 manual. ETK, Bentley and forums indicate it is a Blue wire with a green stripe. I assume it is not constant 12v, as one Blue/GR wire is presenting, so my other BL/GR wire choice has no current either in reverse or out of reverse, yet the rear lights will responding accordingly if in reverse or not. I assume the switch on the tranny will close in reverse providing 12v, yet I don't see any state change either in reverse or out of reverse.
I'm not the brightest bulb when it comes to electrical work. Sensing current it the extent of my working knowledge.
Seeking to get better tho to tackle heated seats for the TI and my vert.