View Single Post
Old 01-11-2013, 05:29 PM   #8
Ragnorak
Senior Member
 
Ragnorak's Avatar
 
Join Date: Dec 2011
Location: Morristown/Waldwick, NJ
Posts: 151
iTrader: (2)
Default

Quote:
Originally Posted by islandtime View Post
I had full urethane bushings in my last E30, FCABs, and everything in the rear including the diff and it had a bit more vibration but honestly not that bad. It was a DD and was at an HPDE at least once a month all over the southeast. I put about 20k miles a year on that setup and even cruising on the highway was fine. I did notice a bit more buzz at certain speeds from the diff but I had a nice radio and with it even at normal levels I couldn't hear anything. I thought it would be much worse than it really was with everything urethane.
What bushings did you use? I'm most concerned about the polyurethane RTABs...I heard without proper lubrication or self-lubricating bushings they can get very annoying.
__________________
GFa: Parts, Powdercoating, and Powah
Ragnorak is offline   Reply With Quote