Quote:
Originally Posted by anassa  Those wheels look like AC Schnitzer wheels, what is the offset/width? What tires you running with that?
Throw some more pictures up!
What are you plans for the suspension to run the wheels planned?
What is the offset for the "15x8 Centerline wheels"? Make sure it works with the 318ti, also make sure the center bore is also correct:
* 3 Series E36 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 30-47
* 3 Series E36 M3 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 35-47
I have seen 72.6mm or 72.56mm, so just make sure they are e36 compatible. |
Of course!
The 18x8.5 wheels are Alutec (?) wheels, I don't know the model.
I currently have 235/40/r18, but plan to use meatier 265/40/r18 tires in the future.
My buddy has a 328i e36 which has a set of cheap coilovers. When he gets new coilovers, I'm picking the cheap ones up. Nothing really crazy planned, just budget fun.
The centerline wheels are made for chevy 5x120-127 models (they're unilug basically.) I'd assume because they're made for a bigger Chevy, the center bore would be plenty. I've seen many people run chevy wheels on e36'.
I'm hoping with 15x8, I can achieve a stance more like Mike Wooding with his hatch.
Offset on the 18inch wheels are +11 I believe. I'm not too savvy with wheels and specs yet.
I will post more pictures soon. I have a spare wheels without a tire that gives good idea of width and offset.
Update soon, once I get my other project on the road and start really digging into the bimmer.
Thanks!