Welcome Charlie! And I'm glad to see that there are a few here older than me (61).
I did the regulator repair on the driver's side of my Ti and found that even if you reverse the regulator attaching bolts to go outside to inside (bolt head inside the door cavity) the regulator arm still passes close enough that it may hang up again and fail. You might hear or feel a clicking sound as the window rolls up or down. I guess it's pretty close tolerance inside the door when all is back together.
I used 10mm allen wrench button screws and a washer and all seems good now. No clicking and smooth operation.
Good luck in your adventure. They are fun cars to play with.
Gotta do that cooling "Y" fitting replacement as well.
LouM... |