View Single Post
Old 03-25-2013, 08:26 PM   #3
J!m
Moderator
 
J!m's Avatar
 
Join Date: Jun 2003
Location: Bouncing off the rev limiter in CT!
Posts: 3,156
Vehicles
iTrader: (1)
Default

I'm with CirrusSR22. You can TRY to get it all back together, but I'd suggest a bright light and a small mirror to try and see what is going on in there.

I do suspect the arm is off the ball, the ball is broken, the arm is bent or a combination of all of these.

I also suggest pulling the tranny because most likely the clutch is close to the end, and any damaged parts could cause other parts to fail (such as the throwout bearing) so pull it down and check it carefully and completely.
__________________
"Speed's just a question of money. How fast you 'wanna go?"

Order Swap Manuals Here => http://www.318ti.org/forum/showthread.php?t=12912

WolferJ- gone but not forgotten. R.I.P.
J!m is offline   Reply With Quote