View Single Post
Old 05-03-2017, 11:32 AM   #15
john318isau
Member
 
Join Date: Aug 2006
Location: NSW, Australia
Posts: 63
iTrader: (0)
Default

Thanks for all the advice. I will see if I can try another coil.

Tonight I got it started, took a lot of cranking, and eventually started with some throttle. Ran very bad and would stall if left to idle, but after it warned it seemed to run okay.

I pulled off a few things to check, and one thing I did find was that at first I couldn't blow through the PCV. After a bit it did seem to free up and I could blow through it.

I have a catch can fitted before the PCV and I emptied it and out came a reasonable amount of oily liquid, the consistency was closer to water than oil. Photo attached.

I put in a spare PCV and bypassed the catch can but will need to try it in the morning to see of it made any difference.


Last edited by john318isau; 05-03-2017 at 11:59 AM.
john318isau is offline   Reply With Quote