Quote:
Originally Posted by L84THSKY If that is the MAX gain in torque and HP, the DASC is not a great deal. What were the stock values? |
I think Chad's numbers might be off a bit. It looks like Chad's dyno runs were done for tuning purposes, not for max power output. I believe dyno's are setup differently when going for max hp readings, that's what I was told. Chad's dyno chart does a great job of illustrated the hp and torque curve that you can expect from a DASC. Very torquey low end then a small dip in power with a jittery increase in power. (I believe
www.techniquetuning.com has smoothed out the curve a bit).
Chad, were your runs done at WOT, or at partial throttle? Are you using your intercooler?