318ti.org forum - View Single Post

gusgriff · 04-29-2012, 11:22 PM

How easy are parts, new and used, to find. I found a 1995 with a cracked head with 137K miles. The interior needs little repair, door panels, headliner and dash switches/knobs. The auto transmission is another unknown. For my daughter so a switch to a manual is not being considered at this time. I would need more info on cost benefit. Suspension and brakes seem OK. The concern is what caused the damage. If it was from overheating what caused it and what other damaged could have occurred. I would be doing the work myself and have a good engine shop in North Atlanta to do the block, cam, crank and head machining. I just completed a 88 535is drive train and brake system rebuild and about to start on stiffening the suspension. I need to determine what parts from the other 3 series and maybe 5 series are interchangeable. The engine is an M42. I expect to rebuild the engine if not now before she goes to college. I am considering getting a worn out engine to rebuild and use the head to check the engine in the car. I could get just a head but the little research I have done seems to show a rebuilt head in the $500-$700 range and a used high mileage engine for rebuild in the $400-$600 range. Even if the head on the worn out engine needed rework, I would be in decent shape and if the existing engine is still OK I would have a bottom end as backup. Replacing the engine with an M44 or M50 if more available is a possibility. Again I would need to know what would be involved. , If anyone has advice, part contacts, opinions or parts, I would appreciate it.

04-29-2012, 11:22 PM	#1
gusgriff Member Join Date: Apr 2012 Location: atlanta Posts: 58 iTrader: (0) Photo Gallery	Considering 318Ti Project Car How easy are parts, new and used, to find. I found a 1995 with a cracked head with 137K miles. The interior needs little repair, door panels, headliner and dash switches/knobs. The auto transmission is another unknown. For my daughter so a switch to a manual is not being considered at this time. I would need more info on cost benefit. Suspension and brakes seem OK. The concern is what caused the damage. If it was from overheating what caused it and what other damaged could have occurred. I would be doing the work myself and have a good engine shop in North Atlanta to do the block, cam, crank and head machining. I just completed a 88 535is drive train and brake system rebuild and about to start on stiffening the suspension. I need to determine what parts from the other 3 series and maybe 5 series are interchangeable. The engine is an M42. I expect to rebuild the engine if not now before she goes to college. I am considering getting a worn out engine to rebuild and use the head to check the engine in the car. I could get just a head but the little research I have done seems to show a rebuilt head in the $500-$700 range and a used high mileage engine for rebuild in the $400-$600 range. Even if the head on the worn out engine needed rework, I would be in decent shape and if the existing engine is still OK I would have a bottom end as backup. Replacing the engine with an M44 or M50 if more available is a possibility. Again I would need to know what would be involved. , If anyone has advice, part contacts, opinions or parts, I would appreciate it.