Quote:
Originally Posted by HotChickenStrips  So after carefully inspection I concluded that my ti shudder/tugging/chattering when taking of in first gear is due to a failing clutch, and those dual mass flywheels are so freakishly expensive, not to mention the added cost of the clutch kit itself, so, has anyone done the conversion to a single mass (solid) flywheel?
Honestly I think it will help in the long run since the solid one is resurfaceable, unline the dual mass. |
There are a few ways to do it, the e30 crowd likes to use the single mass m20 flywheels and starter - not too sure what is all required but its a cheaper way to get a single mass lightened flywheel.
Another option is go with one that is made for the m44 but normally those are expensive.
Lastly you can look into just using a m3 clutch kit with a light weight flywheel. Here is link with some info (a search should bring up a good amount of info):
http://forums.bimmerforums.com/forum...Racing-stage-2 I hope to do the same thing when my clutch dies.