1. What type of transmission? (auto/manual, Getrag, ZF, etc.) Manual Getrag 2. Drive shaft came from what year & model car? 1997 318ti 3. Diff. ratio 2.93LSD 4. Diff. case size Medium 5. Diff. was taken from what year & model car? E30 eta (year unknown) 6. What type of diff. cover? E30 7. Diff. cover was taken from what year & model car? Unknown E30 8. Output flanges were from what year & model car? 1997 318ti 9. Half-shafts were taken from what year & model car? 1997 318ti 10. What modifications did you have to do? None 11. Have you had any issues with this combination? No, besides getting brand new bolts (heated bolts break easily with lots of power!) 12. Misc. Notes: Install both sides simultaneously while raising the diff in or else it will be a very very tricky fit. Last edited by roadrash; 01-31-2010 at 09:44 PM. |