[RAiMA]

Interior

* Remove the back seats (pics come)

1. Remove rear parcel shelf
2. Lift the base of the rear seats and remove
3. Fold the rear seats down
4. At the rear base of rear seats in the middle, ther is a metal latch that is screwed in with a torx screw. Remove the screw and the latch
5. Lift the rear seats back up.
6. In between the side seat padding and the rear seats, at the base hinge there is a clip that holds the seats in place. Remove the clips on both sides
7. Remove folding rear seat support.
8. At the base of the side padding is a plastic screw. Unscrew them both on each side.
9. Remove the side padding.


* Remove rear speakers (pics to come)

Note: This should be done after the rear seats have been removed

1. Carefully remove side lining
2. Remove internal side foam packs
3. Disconnect the speakers on each side
4. The speakers are mounted with 4 metalic screws and one plastic one. Both are different sizes and you'll need a socket set to remove.
5. Carefully pull out the speakers from their mounts. The seat belt will still be attached. Simply slot the seat belt out

* Remove rear tools
* Remove floor mats
* Remove Passenger Seat
* Replace BMW Seats with lightweight race seats
* Sunroof delete
* Roof lining delete

Electrical

* Change over to a smaller battery
* Remove speakers
* Remove excess wiring