View Single Post
Old 09-18-2017, 03:02 PM   #1
Nakamiki
Junior Member
 
Join Date: Nov 2015
Location: Acquigny- FRANCE
Posts: 13
iTrader: (0)
Talking 318ti Turbo by MK Motorsport

Here is my topic for this rare compact, built by MK long long ago...


Oem:
M42b18.
Slip differential
No air conditioning
Sport seats
Bostongrün paint

MK spec:
230bhp
300nm
Td04 turbo upgrade, boost at 0,65bars

Car is tuned with mk suspension ( bilstein B8), full exhaust, ecu, m3 front brakes with 4 pot caliper, MK rims 2 parts...




Upgrade made:
-kw v2 coilover
-m3 3.2 front strut bearing
-mk motorsport final exhaust
-removal of the visco fan and changed for electric one
-bigger radiator
-recaro speed mounted on home made rails
-m tech 2 steering wheel
-center armrest
-willans harness
-pagid brake pad
-4 pistons front caliper rebuild + Iron brackets
-full braided lines
-m3 side protective mouldings
-white/red tail light
-m tech rear spoiler (in paint)
-light flywheel single mass from TTV uk
-sachs performance clutch mecanism
-sachs performance clutch


since some months i mainly worked on improving rear axle.
-m3 3.0l rear differential stripped down for inside slip differential
-323ti in 3.73 ratio bought for swapping and fully refurbishment (4 bearing, all gasket, friction plates, fine grinding of half shell....etc...), and swapping from 168mm to 188mm
-rear trailing arm fully rebuilt with powerflex rubber with excentric, new bearings, refurbished caliper and brake lines
-rear axle carrier fully refurbished too ( electrolytic curing +sanding + rust free primer+ paint +rubber )
-modified output flange based on M3 flanged that are much beefier than 168mm one ( splinned area is longer, outer ring is huge...welded + milling will do perfect flanges)


in parallel I've started improving turbocharging components :
-new silicone hoses
-td04hl 16t new turbo with tunable wastegate and cbv from ARD
-pressure management rebuilt ( was only a tube with hole to fool wastegate spring rate...)
-crankcase ventilation
-full rebuild of Intercooler with Mishimoto universal one + piping

and many other little thing:
-magnecore sparkplug wiring
-boost gauge
-heat insulation of engine harness and battery
-silicone hoses overall improvements
-leakage on upper timing chain cover repaired
-airbag lights fixed
-etc....

will add pictures soon ;-)
Nakamiki is offline   Reply With Quote