318ti.org forum - View Single Post - Custom M44 Eaton Supercharger Build-- Long Overdue

**xxxJohnBoyxxx** · 05-12-2015, 07:33 PM

If you want real power do a Nick G stage 3. It will have 30# injectors with EV-1 style adapters plus you install a 1995 3" MAF from a M3 or 528i, must be a 1995 for direct plug and play. The DME will be flashed with a new tune and all you need is a smaller pulley on the SC from Pulley Boys and you will be flying.

I ran a Walbro fuel pump and it was good for little over 500hp 28psi and meth shot

05-12-2015, 07:33 PM	#39
xxxJohnBoyxxx Senior Member Join Date: Dec 2007 Location: Gulfport, Florida Posts: 3,208 iTrader: (1) Photo Gallery	If you want real power do a Nick G stage 3. It will have 30# injectors with EV-1 style adapters plus you install a 1995 3" MAF from a M3 or 528i, must be a 1995 for direct plug and play. The DME will be flashed with a new tune and all you need is a smaller pulley on the SC from Pulley Boys and you will be flying. I ran a Walbro fuel pump and it was good for little over 500hp 28psi and meth shot Last edited by xxxJohnBoyxxx; 05-12-2015 at 07:47 PM.