318ti.org forum - View Single Post - New DIY with pictures for working MPG on 6cyl swap

Dredder · 04-27-2005, 03:55 AM

on top ( female ) side. I soldered a 16 gauge wire into pin 24. This the white/black wire by pulling back the protective rubber boot on the female connector.

04-27-2005, 03:55 AM	#4
Dredder Senior Member Join Date: Jan 2005 Location: Portland, Oregon Posts: 484 iTrader: (0) Photo Gallery	on top ( female ) side. I soldered a 16 gauge wire into pin 24. This the white/black wire by pulling back the protective rubber boot on the female connector. Attached Thumbnails