View Single Post
Old 01-24-2011, 01:42 AM   #1
juan.manjarres
Senior Member
 
juan.manjarres's Avatar
 
Join Date: Dec 2008
Location: miami
Posts: 232
Vehicles
iTrader: (0)
Default Fuel Pump or Relay?

hey guys,

Today I went for a drive and then came to a shop and turned off the car. After about 20 minutes I went back to the car and tried to start only to find my car sputtering and with no response to the throttle. I then kept on trying to start the car and it would start up and sputter with again no response to throttle position. Now it cranks but does not start. I replaced the camshaft position sensor and it also did not start. I now am testing the voltage to the fuel pump and it is measuring 10.6V when cranking the car. Is this a faulty relay? or is this the correct voltage to the pump? When I turn the ignition on there is no reading to the pump only when I crank the engine will it receive a voltage reading. Any help here would be greatly appreciated, thanks guys!
juan.manjarres is offline   Reply With Quote