View Single Post
Old 05-03-2011, 04:56 AM   #129
SueL
Junior Member
 
Join Date: Mar 2011
Location: Vancouver
Posts: 6
iTrader: (0)
Default

Quote:
Originally Posted by Eric View Post
There is one that is way down inside the rubber part - you can't see it, you can only feel it. I assume that's the one in question ... I would carefully trial-fit every darn tool you've got - different Torx sizes, Phillips head, and standard screwdrivers. Remember that the hole in the rubber, and the tunnel it passes through, may not be lined up perfectly with the fastener at the bottom, so you may have to poke around a bit to find the center of the screw. Once you get it, you'll know it. If it doesn't quite feel right, then try a different tool, until it "hooks up" solidly. - Eric
Thank you for your answer. I suspected as much. I'll continue and let you know how it goes. Sue
SueL is offline   Reply With Quote