View Single Post
Old 04-19-2011, 05:19 PM   #10
blowin 4
Senior Member
 
blowin 4's Avatar
 
Join Date: Feb 2009
Location: san jose
Posts: 425
iTrader: (0)
Default

Quote:
Originally Posted by xxxJohnBoyxxx View Post
Engine temp sendor. If this is bad and tells the DME the engine is cols all the time is will be a bear to start when warm. I had this issue when my sensor was unplugged and it took like 30 seconds of cranking or more to start my car when it was warm. Bad temp sensor or unplugged will cause starting issues like you are having.

Unloader relay on my car is located in with the DME. It is the only relay in the DME compartment. When you crank your car all accessories should turn off until your done cranking...
Can't find any info about up loader I have a new cold start sensor I think it 02 sensor they say 02 don't start working till car warms up that the cold stat monitor engine then 02 takes over when hot I think it sending a rich signal to the injector pulse I'll find out got one coming .
blowin 4 is offline   Reply With Quote