When I change brake pads: 1) Remove the caliper and carrier 2) Remove the old pads 3) Separate the caliper from the carrier 4) Compress the caliper piston all the way (you will need to have the brake fluid cap off for this part) 5) Clean the carrier where the ears on the pads reside 6) Lube the guide pins 7) Put the carrier back on the caliper 8) Install the inside pad that clips into the caliper piston 9) Install the outside pad 10) Slide over the rotor and bolt back on 11) Install the spring clip 12) Reinstall the brake fluid cap (when I'm done changing all the pads I'm going to change) __________________ SUPPORT 318ti.org! CLICK THE LINK ABOVE! Hosting a forum like this is not free. 318ti.org is one of the best BMW forums on the web because it is member supported, not vendor supported. The cost to become a Supporter is a nominal $10.00... A YEAR! DO IT! NOW! www.BimmerBum.com ALL NEW! 318ti Specific Parts For Sale www.facebook.com/BimmerBum BMWCCA #132203 95 318ti Club Sport 98 318ti Active S50 Swap |