Removed broken valve cover bolt Removed and replaced plastic water pipe on block. Replaced valve cover- it's painted black now, looks spiffy. Reinstalled lower intake manifold, new gasket. Reattached electrical 'squid'- oil pressure sensor, coolant temp sensor, DISA controller, alternator, starter, cam pos sensor, crank pos sensor. Cleaned fuel injectors, replaced upper and lower O-rings. Reinstalled fuel rail, with new supply line gasket and return line hose. Reinstalled plug wires and coil. It looks like an engine again.... __________________ *Except 318ti '97 318ti M-Sport '95 M3 BMWCCA |