318ti.org forum - View Single Post

zoner · 07-29-2010, 06:40 PM

I have Style 67's (18" E46 M3) wheels on my ti and the stock rears (9" wide) are too wide without rolling the fenders. Some people on the forum run the front wheels (8" wide) on both front and rear of the ti, but personally I think that 18" is just a little big for our cars. My car has stock suspension and I think it sits way too high with the Style 67's. Although, I'm more about function than form. I have seen some 18" on ti's that look decent, however.

I have a set of DS I's that I'm preparing to install (17" dia., 7.5" width) so they will tuck correctly and I can finally put my H&R springs on and drop the car an inch or so.

07-29-2010, 06:40 PM	#6
zoner Senior Member Join Date: Oct 2008 Location: Los Angeles, CA Posts: 1,464 iTrader: (7) Photo Gallery	I have Style 67's (18" E46 M3) wheels on my ti and the stock rears (9" wide) are too wide without rolling the fenders. Some people on the forum run the front wheels (8" wide) on both front and rear of the ti, but personally I think that 18" is just a little big for our cars. My car has stock suspension and I think it sits way too high with the Style 67's. Although, I'm more about function than form. I have seen some 18" on ti's that look decent, however. I have a set of DS I's that I'm preparing to install (17" dia., 7.5" width) so they will tuck correctly and I can finally put my H&R springs on and drop the car an inch or so.