Quote:
Originally Posted by sirius815  To add some more info, I can conclusively say (and as already mentioned above) the 128 rotors do not fit as the rotor sits about 6mm too far inwards. If you still want to use the slightly larger rotor, you'll have to back mount the adapter pieces and get ~16mm spacers for them as well along with some shallow head hex bolts (interference with the caliper bracket).
I spoke with Simon (srs-concepts) about the issue and he concurs with the problem. See pictures for reference.... |
This ended up being my solution. I still need to get another caliper bracket because I shaved it down considerably trying to make it fit. But at some point it just became clear it wasn't going to work. I found some 20mm spacers and shaved them down to 18mm and the fit was perfect with the bracket swapped over to the back side.. You do need to remove most of the curved section of the backing plate for this as well.