Tip to easy alternator install. It will just drop in without a fight.
1. Look at the two rear alternator mounting tabs.
2. You will see two hexagonal steel inserts. They are threaded.
3. The alternator bolts thread into these inserts.
4. I press them out a little to widen the opening. (Do not press them out)
5. I use a 5 inch c-lamp and a socket to press them out a little. __________________
1996 Ti 280k miles and still going....
1993 964 - holding on to this one
2001 Burban, 240k miles
2018 Suburban Z71
|