Quote:
| Originally Posted by Phil Marx I was thinking that, too, but the whole point of the tool is to eliminate the guesswork. The Peake code interpretation manual says it's this:
"secondary air control" and "fuel trim QL additive"
Does that mean anything to you? It doesn't to me! |
Look what I found!:
Subject: Re: [UUC] Peake reader codes question
Additive mixture problems are at idle.("fuel trim QL additive")
You most likely have an air leak, probably from the intake gaskets. I'd
suggest resealing the intake and replacing the cyclonic plate at the rear of
the manifold.