318ti.org forum - View Single Post

rholbrook · 07-07-2008, 10:50 PM

This thread saved me hundreds of dollars, dealer quoted me like 4 hours of labor WTF!!! With a little patience this is an EASY fix, everything is easily accessible.

This definetely isn't rocket science, the grease in there gets hardened up, and the regulator arms bind up causing them to bend over time. taking the time to clean all the old grease out and any moving pieces in general, replace the plastic clips, etc. you'll have it working like new. I spent 10 bucks on plastic sliding clips, bent the regulator arm back, and an hours worth of my own labor. Piece of cake, works like brand new. KUDOS!!!!!!!!!!!!

07-07-2008, 10:50 PM	#22
rholbrook Member Join Date: Jun 2007 Location: portland Posts: 42 iTrader: (0) Photo Gallery	Window problem FIXED... great thread saved me $$$$ This thread saved me hundreds of dollars, dealer quoted me like 4 hours of labor WTF!!! With a little patience this is an EASY fix, everything is easily accessible. This definetely isn't rocket science, the grease in there gets hardened up, and the regulator arms bind up causing them to bend over time. taking the time to clean all the old grease out and any moving pieces in general, replace the plastic clips, etc. you'll have it working like new. I spent 10 bucks on plastic sliding clips, bent the regulator arm back, and an hours worth of my own labor. Piece of cake, works like brand new. KUDOS!!!!!!!!!!!!