Quote:
Originally Posted by inlacal All I care about is the transmission mating to the M44. Anything beyond that (linkage, shifter, driveshaft, trans mounts) can be made to work. I don't know anyone on this board that has done it, but I'll be right on top of this if someone can confirm the block to trans mating. |
Why wouldn't it? The ti uses the exact same transmission (Getrag 250) as the 318/323/325 motor'd cars. Find one from one of those and it will be a simple bolt on.
I also understand that the larger ZF from the M3's will bolt up too. A E36 is a E36 basicly. The only real differences would be the linkage and flanges to bolt up the drive shaft.
S