318ti.org forum - View Single Post

**xxxJohnBoyxxx** · 05-22-2010, 03:30 AM

I think they are 5/16 high pressure. Make sure you get fuel injection hose or you will have a blow out of the line and a fire.

I use the 5/16" fuel injection hose from the steal lines under the car about where the drivers seat is to the injector rail and return back down to the regulator which is located in the same area under the car about where the drivers seat is. This is what was supplied with the DASC supercharger kit. I suggest you use a little rubber hose as possible. Steel line is great as long as it is not rusted from winter/salt driving.

Best, John Smith

05-22-2010, 03:30 AM	#3
xxxJohnBoyxxx Senior Member Join Date: Dec 2007 Location: Gulfport, Florida Posts: 3,208 iTrader: (1) Photo Gallery	I think they are 5/16 high pressure. Make sure you get fuel injection hose or you will have a blow out of the line and a fire. I use the 5/16" fuel injection hose from the steal lines under the car about where the drivers seat is to the injector rail and return back down to the regulator which is located in the same area under the car about where the drivers seat is. This is what was supplied with the DASC supercharger kit. I suggest you use a little rubber hose as possible. Steel line is great as long as it is not rusted from winter/salt driving. Best, John Smith