[Artem]

Engine related:
BMW M44 coil pack + wires + covers in fair shape $50 for it all - I went to COP at about 100k miles. PO had records indicating the wires were replaced at around 70k miles, but I wouldnt put too much faith into it, as I think he was scammed by the mechanics that he took the car to, but either way - it worked great when I pulled it.

Water Pump with a metal impeller (cast iron?) - $30 less than 1000 miles on it

Stock Sachs clutch fan for older models, M42 and M44 - $40, less than 1k miles

Mechanical fan - $30 < 1k miles on it, I bought it brand new, OEM unit (more expensive one)

Fan Shroud - $15, one of the mounting tabs was broken off, but I repaired and reinforced it.

BMW M44/E36 mech tensioner with bad bearing - $10



Headlights:
DJ Auto Passenger side headlight with angel eyes (just one) - $40
Pair of lights from my TI - one is in fair shape, other (pass. side) is in bad shape - $20 for the pair, they all have hi/low bulbs in there still, both are pitted.
Pair of headlights from my M3 - good shape, all bulbs included, both are pitted. - $40 for the pair



Bumpers:
2 M3 bumpers, both need repairs, both are arctic silver, $100 each. One has a bottom surface that needs work, no splits/cracks, and the other is cracked horizontally where the license plate trim goes.

Bumper shocks - $15 each

Bumper reinforcement plate - $40



Other stuff:
Blitzsafe CD Player adapter for all E36, E46 OEM radios with no DSP - $50

Soundgate ABMW35V5 - Alpine CD Changer interface to BMW OEM Headunit - $40




All prices are OBO (obviously), let me know if you are interested in anything specific, or if I am completely off with my prices on something.



I have a stock 3.45 open diff that I need to get rid of, a pair of E30 stock diff flanges, a bunch of M42 related DASC hardware and stuff (pulley plate (one that mounts 2 pulleys for an M42), pulleys (in the process of crapping out), intake elbow for M42 DASC, hoses, RRFPRs (2 of them), ICV for an M42 (2-pin), etc etc..)


Or maybe I can trade with someone if you actually like anything on this list THAT much, I am mostly looking for a decent exhaust (not too loud, but more free flowing), euro steering wheel (dreamin), knowledge on how to make custom silicone hoses, or where to get one that has a slight 's' shape that offsets the intake from a stock TB to a 3" MAF... Or maybe something else - let me know either way.


Oh and id rather not ship, but if you really want something let me know. Im in NORCAL.



Cheers,
Artem