well i finished my kit 2 day 10 hours more so it took me a total of 17 hours,but i had a few problems,the new idler pulley didnt fit the bolt was to big for the pulley and spacer so it wasent machined right,so i just used the old pulley,then the prv valve wasent sealing it was warped so i put a oring in there to seal it up.and the afm and air filter brackets wernt even close to fiting.so i had to make my own ,and the wires to the afm were to short,and the long vacum line was way to short ,and there wasent enough loctight,so i had to make a few trips to the auto parts store,but once all that was done, i fired it up and it purred just fine and idled and reved up great.didnt have time to test drive though cause i got done so late. |