I've also fitted M3 240mm lightened flywheel with clutch kit on my M44 with no issues as plan was to fit the DASC till I found out it no longer exists...orz. was thinking of going for the mid sized 228mm but could not find any lightened flywheels. some say its better to put a spring loaded disc from the 5 series or M5, I forgot, for better engagement. I had no issues with engagements so kept using the solid disc type, its been 6 years now without any issues just the chattering noise. initially I used the M3 slave cylinder but changed to the ti/is slave cylinder for shorter pedal stroke but it sure made it heavy feel... Here are some of rough numbers I know....may not be correct M3 original flywheel: 26.5lbs lightened flywheel: 16lbs cover: about 12lbs disc: 2.2 to 2.6lbs M44 original flywheel: 26.9lbs __________________ taishi |