Quote:
Originally Posted by mohaughn The fuel line clamps at the fuel rail inlet/return lines were crimped hose clamps, and as such were not re-useable. I have no clue how other cars are configured, or if this was something that a previous mechanic had done to my car. I know the lines was pretty hard/not flexible, and it just made sense to replace them. The cost is minimal when you take into consideration how bad a split high pressure fuel line is. |
Mohaughn,
On a 95 car, the fuel lines are metal lines which come within 2 inches of the fuel rail, then a short piece of hose in between. On realoem.com it shows hose clamps are used.
http://www.realoem.com/bmw/showparts...04&hg=13&fg=10 My car is a 95, too. The lines to the fuel rail look the same as the OP's.