Quote:
| Originally Posted by cali-ti 1) proper torque settings for diff cover bolts (we torqued them to 35 since the cover is aluminum and i don't want to damage it but this was just a somewhat educated guess)
2) torque for new diff drain/fill plugs that use an imbedded o-ring (rather than the aluminum crush washer) |
1) Diff cover: M8 bolts = 33Nm = 24.3 ft-lbs, M10 bolts = 47Nm = 34.7 ft-lbs (Good guess!)
2) Don't know about the "new" style plugs, but the old crush washer ones are 51.6 ft-lbs.
Constant