 Udate
So I spent most of yesterday testing what I could, I checked all my fuses, and found a burnt out fuse for my drivers high beam, but thats all. Tested the starter just like you recommended in your post, it works fine, tested all wires and connections, no issues, I found the relay click from the EWS module was the clutch switch not the ignition. I tested the antenna ring for the key, it was only 3 ohms, so no worry there, which makes the problem either the key (of which i only have 1 and it has seen better days) the transponder or the EWS 2 Module itself. Is there any way to test these parts without any bmw special tools?
Thanks much
Darrel |