Just add a cheap in tank pump on the off side, doesn't have to be real high volume. Cost 30 to 40 bucks.. It only has to run on track, so a switch can be added. Put a piece of AL tubing on the pump and have it pump into the factory pump baffle. I'd use fuel cell foam to hold it in place .. and it would not require much in the way of mods besides adding a power pass through to the guage flange.. __________________ Dave - PDX 1995 318ti - Active Black and Tan. 2005 330xi - Mtech 1 - 6spd - Orient Blue/Black |