318ti.org forum - View Single Post - Fuel starvation at half-tank

HAZE33 · 05-07-2014, 04:15 PM

^ great solution

Does the factory "housing" on the off side have provisions for a pump already? Or is that what the fuel cell foam is for?

Are you saying to have the aluminum tubing on the outlet of the pump cross over inside the tank? No extra lines on the outside of the tank? Very clean...

I read the pdf for the M3 fix, and they were running the pumps in parallel with a bunch of TEE fittings and I didn't like the sounds of that.

05-07-2014, 04:15 PM	#11
HAZE33 Junior Member Join Date: May 2014 Location: PHX AZ Posts: 6 iTrader: (0) Photo Gallery	^ great solution Does the factory "housing" on the off side have provisions for a pump already? Or is that what the fuel cell foam is for? Are you saying to have the aluminum tubing on the outlet of the pump cross over inside the tank? No extra lines on the outside of the tank? Very clean... I read the pdf for the M3 fix, and they were running the pumps in parallel with a bunch of TEE fittings and I didn't like the sounds of that.