318ti.org forum - View Single Post - Custom M44 Eaton Supercharger Build-- Long Overdue

**xxxJohnBoyxxx** · 01-14-2015, 02:36 AM

I think your stage 2 clutch most likely will slip. I don't want to pitch parts on your build thread but I have a Spec Stage 5 kit. Billet Alum flywheel at 9#, Stage 5 disk and pressure plate. Here is a run on my car with a Stage 3 clutch, You can see in the video the clutch totally blows out the complete run.

Video here: https://www.youtube.com/watch?v=1FIM8sBtjss

Make sure you turn up the volume so you can here the boost slam this 2.1L stroker motor

01-14-2015, 02:36 AM	#15
xxxJohnBoyxxx Senior Member Join Date: Dec 2007 Location: Gulfport, Florida Posts: 3,208 iTrader: (1) Photo Gallery	I think your stage 2 clutch most likely will slip. I don't want to pitch parts on your build thread but I have a Spec Stage 5 kit. Billet Alum flywheel at 9#, Stage 5 disk and pressure plate. Here is a run on my car with a Stage 3 clutch, You can see in the video the clutch totally blows out the complete run. Video here: https://www.youtube.com/watch?v=1FIM8sBtjss Make sure you turn up the volume so you can here the boost slam this 2.1L stroker motor Last edited by xxxJohnBoyxxx; 01-14-2015 at 02:44 AM.