M52 swap shifter question Hey everyone. I got my swap finished and running. But the shifter position is less than desirable. I still have the getrag that the 318ti came with It seems like the shifter is pushed a little too far back and it barely will stay in 4 th gear. I have done some research and it looks like getting a z3 shifter and the mount rod will help the positioning of the lever After doing some searching it seems like I may need to bend the gear selector rod or shorten it. If I got the whole 1.9 z3 or the 2.5 shift assembly would this fix my problem? I was just wanting to know what everyone else has done with their swaps Also sorry if this is the wrong place for this thread. |