318ti.org forum - View Single Post

iski123 · 09-24-2021, 04:21 AM

I bought some crutchfield 6.5's and they were a pretty clean bolt in job.
Had to remove the sound dampening padding cup thing from behind the speaker then they fit right in. even have the same screw/bolt pattern and everything.

Only mods required were cutting the rim of the speaker a bit to fit the hatch release lever on the drivers side and for the cutouts that house the plastic trim cover piece. Have photos I'll upload once I figure outa good hosting site.

09-24-2021, 04:21 AM	#12
iski123 Junior Member Join Date: Mar 2015 Location: Canada Posts: 8 iTrader: (0) Photo Gallery	I bought some crutchfield 6.5's and they were a pretty clean bolt in job. Had to remove the sound dampening padding cup thing from behind the speaker then they fit right in. even have the same screw/bolt pattern and everything. Only mods required were cutting the rim of the speaker a bit to fit the hatch release lever on the drivers side and for the cutouts that house the plastic trim cover piece. Have photos I'll upload once I figure outa good hosting site.