[cooljess76]

Sounds like what I went through. Everything else was straight and the window kept popping out of the front track. As it's rolling down, if it starts to slip out of the track, it will have more resistance in the front, causing it to go crooked and then pop the sliders off of the regulator arms. Try to feel which way the window is going off track(inboard or outboard) If it's going outboard, grab onto the front vertical channel and twist it counter clockwise. Inboard, twist clockwise. It helps if you could roll the window down a little at a time and keep feeling the vertical channel until you find where the window starts to come off track. Thats about where you want to twist it back into place. Once you find that spot, take the window out of the track and let it rest away from the track so you have room to get your hand in there and tweak it. Best of luck to you.