318ti.org forum - View Single Post

drowan · 05-28-2014, 07:32 AM

Hi everyone, I'm looking for a little information about gutting a DISA valve, if anyone can answer a few question it would be greatly appreciated.
Thanks in advance!

When gutting you have to seal a hole. This one?

Click image for larger version Name: image.jpg Views: 397 Size: 47.9 KB ID: 14972

Second question, when you gut the valve do I have to remove the rubber boot inside the valve or is cutting the metal stem as low as possible and removing the butterfly sufficient? If post a picture of what I did but is can't seem to upload it.

Thanks, Daniel

05-28-2014, 07:32 AM	#1
drowan Junior Member Join Date: Mar 2012 Location: Phoenix Posts: 8 iTrader: (0) Photo Gallery	Gutting a DISA valve Hi everyone, I'm looking for a little information about gutting a DISA valve, if anyone can answer a few question it would be greatly appreciated. Thanks in advance! When gutting you have to seal a hole. This one? Second question, when you gut the valve do I have to remove the rubber boot inside the valve or is cutting the metal stem as low as possible and removing the butterfly sufficient? If post a picture of what I did but is can't seem to upload it. Thanks, Daniel